Product Thermal Capacity: 1400-29000 KW

Working Pressure: 0.8-1.0 MPA

Available Fuel: Bituminous coal, anthracite, biomass particles etc.

Application Scale: Chemical,high temperature heating technology for fertilizer, melamine, alumina and so on

Boiler Introduction: The YLW series thermal oil boiler has reasonable structure, advanced technology, less floor space, small shape, beautiful appearance, simple management and high thermal efficiency. It has remarkable energy saving effect and economic benefit, and has unique structure compared with similar products.

 

YLW Series Thermal Oil Boiler Introduction

Thermal oil boiler is a heating equipment used in industrial production. Biomass and coal as fuel and flue gas as heat source, heat conduction oil as heat carrier. The liquid phase circulation of the heat carrier is forced through the circulating oil pump, and the heat is transferred to the heating equipment, which is then returned to the high temperature, low pressure and energy saving equipment reheated in the heating furnace. The heating temperature can be up to 340℃, and generally under the working pressure of 1.0mpa, because the working in the liquid phase state, safe and reliable.

The heating surface of the coal/biomass thermal oil boiler is reasonably arranged, the heat conduction oil has long service life, high temperature and low pressure, which can obtain higher working temperature under lower operating pressure. Liquid phase heat transfer, at less than 300℃ heat conduction oil is 70 ~ 80 times lower than saturated steam pressure of water, heat equipment pressure conditions can be greatly reduced, reduce equipment costs.

The YLW series thermal oil boiler has reasonable structure, advanced technology, less floor space, small shape, beautiful appearance, simple management and high thermal efficiency. It has remarkable energy saving effect and economic benefit, and has unique structure compared with similar products. Accurate and reliable temperature regulation, complete operation control and safety monitoring device, high degree of automation. Labor intensity of workers is low, and energy saving and consumption reduction, compared with steam heating can be 1 to 1.5 times of energy saving, saving operating cost is obvious. It can be widely used in many industrial heating processes. Replace electricity, steam and other heating, improve production efficiency.

Coal/Biomass Thermal Oil Boiler Advantage

• Adaptable to different fuels
  The combustion equipment is designed separately from the upper furnace body, and the furnace structure can be designed separately according to the different properties of solid fuel.
• Diversity of grate structure
  The structure of the grate has fixed and automatic chain grate two forms, according to the nature of fuel can be used manual or mechanical feeding.
• Square coil combustion chamber
  The boiler combustion chamber is composed of fireproof chamber and square coil tube, with sufficient fuel combustion space, complete combustion and high thermal efficiency.
• Best coil design
  The radiating section is made of square plate, while the convection section is made of serpentine tube. The tube has good thermal expansion performance, low stress, safety and reliability.
• Best process design
  The flue gas has three return trips, the medium flows through convection and radiation coil, the flow rate is uniform, the operation is safe and stable.
• Put in enough effort
  The heating surface layout is reasonable, large area, good heat transfer effect, high efficiency, stable output, sufficient.
• Complete automatic control measures
  Accurate oil temperature control, medium temperature, pressure and ultra-smoky temperature set multiple control protection, ensure safe and reliable operation.
• Advanced level of automatic control
  The boiler controller adopts high quality electrical components with reliable performance. The controller has three forms: ordinary type, English menu type with liquid crystal display, and touch screen type with man-machine conversation remote control.

YLW Series Thermal Oil Boiler Application

• Chemical industry: grease chemical industry, polymerization industry, reaction tank, distillation and concentration.
• Plastic industry: Plastic blasting and extrusion shaping.
• Textile industry: resin molding machine, dyeing machine, drying room, high temperature machine, drum machine.
• Rubber industry: Vulcanization heating of rubber.
• Food industry: cooking, drying and vegetable oil refining.
• Forest product industry: Heating and shaping of plywood, Paulie board and fiberboard.
• Paper industry: multi-layer cardboard, drying and drying of packaging cartons.
• Others: heating of metal plating bath, coating condensation, drying, pharmaceutical industry distillation, reduction, concentration, dehydration, etc.

YLW Series Thermal Oil Boiler Product Parameter

Model	Rated thermal power  (KW)	Rated thermal power  (x104kcal/h)	Design working temperature(≤℃)	Rated working pressure(MPa)	Thermal efficiency(≥%)	System installation power(KW)	Maximum transport size(m) (L×W×H)
YLW-1400M/AⅡ	1400	120	320	0.8	80	55	5.0×2.3×2.5
YLW-1800M/AⅡ	1800	160	320	0.8	80	63	5.6×2.3×2.8
YLW-2400M/AⅡ	2400	200	320	0.8	80	76	6.5×2.5×2.8
YLW-2800M/AⅡ	2800	240	300	0.8	80	85	6.5×2.6×3.2
YLW-3500M/AⅡ	3500	300	320	0.8	80	105	7.5×2.6×3.2
YLW-4200M/AⅡ	4200	360	320	0.8	80	125	7.4×2.9×3.3
YLW-4600M/AⅡ	6000	500	320	0.8	80	155	8.4×3.4×3.3
YLW-6000M/AⅡ	7000	600	320	1	80	170	9.0×3.4×3.4
YLW-7000M/AⅡ	8200	700	320	1	80	193	9.8×3.3×4.1
YLW-8200M/AⅡ	4600	400	320	1	80	150	8.0×2.9×3.4
YLW-9400M/AⅡ	9400	800	320	1	80	160	9.8×3.5×4.1
YLW-10500M/AⅡ	10500	900	320	1	80	160	10.5×3.5×4.1
YLW-12000M/AⅡ	12000	1000	320	1	80	260	11.2×3.6×4.1
YLW-14000M/AⅡ	14000	1200	320	1	80	320	10.5×4.0×3.5
YLW-16500M/AⅡ	16500	1400	320	1	80	380	11.5×4.3×3.5
YLW-18000M/AⅡ	18000	1600	320	1	80	450	11.5×4.5×3.5
YLW-21000M/AⅡ	21000	1800	320	1	81	520	11.5×4.5×3.9
YLW-23300M/AⅡ	23300	2000	320	1	81	600	11.5×3.0×4.0
YLW-26000M/AⅡ	26000	2200	320	1	81	700	11.5×3.0×4.0
YLW-29200M/AⅡ	29200	2500	320	1	81	825	12.0×3.3×4.2