The gas hot water boiler is equipped with a special microcomputer controller for the hot water boiler, a large screen full Chinese LCD screen, with super bright backlight, no matter day or night, the operating status of the boiler is clearly visible. 4 MW hot water boiler circulating pump working conditions, burner working conditions, boiler water temperature, water level, current time, alarm records, etc.
Gas Hot Water Boiler Operation
The boiler operating status is readily available; easy to set up: After the boiler is turned on, the operator can press 6 buttons Freely enter the standby state (setup). The enter the running state (turn on), exit the running state (stop). And set the operating parameters when in the standby state. The complete functions: the current time, alarm temperature, and upper limit of water temperature can be set arbitrarily Operating parameters. Such as temperature, lower limit temperature of water temperature, circulation pump opening temperature, circulation pump closing temperature, boiler switching time (can be divided into 4 time periods). Usually, the operator only needs to press the “Start” button to turn on, and then press the “Stop” button to stop, which is very simple.
This series of hot water boilers adopts original imported burners, fully automatic programmed control. The fan automatic purging, electronic automatic ignition, automatic oil and gas combustion. The automatic ratio adjustment of air and oil (gas), good atomization effect, full combustion, energy saving and environmental protection. With flameout protection device to ensure combustion safety. Under normal circumstances, the output of the burner will automatically adjust the length of the combustion flame with the boiler temperature.
When the boiler outlet temperature reaches the set value, the burner will automatically stop burning. And when the temperature is lower than the set value, the burner will automatically start working. When the gas fired boiler has abnormal fuel or air intake, the fault light will be on. The program control device will immediately stop the fuel output, and the burner will automatically stop.
4 MW Hot Water Boiler Description
The 4 MW hot water boiler adopts a fully wet back three-pass structure, and the flue gas flow is long. This series of boiler products can effectively reduce the exhaust gas temperature. The full corrugated furnace is set up to cause strong flame disturbance. The strongly improve the heat transfer coefficient. And effectively prevent the equipment life from being reduced due to the thermal expansion and contraction of the metal. The large-diameter smoke pipe the gap between the large hole bridge and the boiler makes the boiler scale thinner. And easy to clean in the same time.
The structure of the hot water boiler is designed according to normal pressure, and the top is equipped with an air hole. The boiler works under normal pressure to avoid danger. The boiler body adopts computer optimization simulation design. Which completely optimizes the size of the boiler and makes the shape harmonious and beautiful.
Gas Hot Water Boiler Protection Device
Gas fired hot water boiler has multiple safety protection, leakage protection that is, leakage automatically cut off the power supply. Overheating protection, that is, when the boiler water temperature reaches the alarm temperature, automatically stop the burner and give an alarm. Secondary overheating protection that is, when the boiler shell temperature exceeds 105℃, automatically cut off the secondary loop, the boiler stops working. The protection against dry burning means that the excellent water level electrode rod monitors the water level in real time. When the water level of the boiler reaches or is lower than the extremely low water level for other reasons. The boiler stops working to prevent the danger of dry burning.
The 4 MW hot water boiler uses glass wool as the whole body insulation, which has good insulation effect and low heat dissipation loss. This series of gas fired boiler uses a computerized hot water boiler controller, and all functions are magically stored on a smart chip. The boiler is turned on by one button, and it runs fully automatically at a fixed time and temperature. The user can set the start and stop time, and set After completion, there is no need for special personnel on duty, saving trouble and effort. The boiler uses large fonts to display the water temperature. Which is convenient to grasp the operating status of the boiler and the system. The water temperature can be set at will from 10℃ to 90℃. The boiler automatically heats the system or provides users with hot water for life and bathing.