WNS series natural gas boiler fuel by outside air into the burner ignition kinetic energy generated automatically by the automatic adjustment, high temperature fire, from the furnace front end to burnout indoor, in the burning room back into the upper convection heating surface, through the upper smoke box before entering the second convection heating surface from the smoke box at the back of the left after the boiler to the chimney into the atmosphere. If the smoke can be settled in the front and back of the smoke box and the burnout room, open the inspection door to clean up all the dust. The working medium is heated to produce saturated steam from the main steam valve and output to the operating system.

WNS type horizontal gas steam boiler is equipped with industrial burners with good technical performance. It adopts advanced technologies such as automatic proportional adjustment of combustion, automatic adjustment of water supply, program start and stop, automatic operation, and has automatic protection functions such as high and low water level alarm and low water level, ultra-high steam pressure and flameout. This type of boiler has the characteristics of compact structure, safe and reliable, easy operation, quick installation, less pollution, low noise, high efficiency.

WNS natural gas boiler is made up of three parts when it leaves the factory: the main boiler, the chimney and the pipeline system. The main engine and the chimney have been manufactured in the factory, and the pipeline valves and instruments supporting the main engine have been installed randomly and transported to the site to assemble the main engine and the chimney. The air source, power supply and water pipeline can be connected on the spot for the test run. Help users greatly shorten the installation cycle, and can ensure product quality.

This boiler adopts the domestic and foreign advanced large furnace design technology, in the original traditional design, expanded the furnace diameter, increased the radiation heat transfer area, so that the heat transfer of the boiler is mainly radiation heat transfer, not only reduce the heat transfer. The second and third routes are burdening, but also allow the fuel to burn fully and reduce the generation of harmful gases. At the same time, the application of corrugated furnace storage tank technology in the high temperature area of the furnace not only increases the radiation heat transfer area, but also has a blocking effect on the movement of flue gas, so that the radiation heat transfer effect is more obvious. The corrugated furnace can not only improve the overall strength of the furnace body, but also automatically compensate the thermal expansion stress of the furnace, so as to avoid the defects such as weld cracking caused by the change of thermal stress.

ZOZEN can produce more than 400 different types of boiler products, including 2 tons to 100 tons of coal-fired boilers, 2 tons to 75 tons of biomass boilers, 1 ton to 110 tons of oil gas boilers and thermal oil boilers. Each of our boilers has been strictly checked to ensure that users can use them safely. If you have any questions or are interested in our products, please send us an email at zhulin@zozen.com or chat online.