Gas thermal oil boilers are widely used in all walks of life that need to be heated or dried at high temperature. Horizontal thermal oil heater has the advantages of high temperature, low pressure, accurate temperature control and high energy utilization rate. The product can also be equipped with a steam generator to produce saturated steam below 1.3Mpa for users. The boiler adopts the wet-back internal combustion structure, the top of the boiler with a top coil, effectively prevent the flame directly radiation back wall, at the same time, under the premise of the compact structure, increase the radiation area, improve the thermal efficiency of the boiler.

The gas thermal oil heater adopts the micro positive pressure operation, which effectively improves the combustion intensity of the furnace and makes the volume of the boiler with the same capacity smaller. At the same time, the air leakage in the furnace and flue of the boiler is eliminated, and the thermal efficiency of the boiler is improved. Boiler adopts advanced EDA technology, detailed calculation of the size of the furnace structure, the flow rate of flue gas, reasonable and full use of flame and flue gas heat exchange, ensure the reliable work of the boiler and sufficient cooling, improve the thermal efficiency of the boiler. YYQW series boiler adopts high efficiency condensing technology, which effectively reduces the temperature of exhaust smoke and improves the thermal efficiency of the boiler.

This series of thermal oil boilers adopt reasonable structure design and excellent refractory and heat preservation materials, which greatly reduce the outer temperature of the furnace body. Make the external temperature below 50 degrees, reduce heat loss, improve the thermal efficiency of the boiler. Horizontal thermal oil heater adopts a new design, reduce the emission of harmful substances when fuel combustion, meet the environmental protection standards. In particular, reduce the emissions of nitrogen oxides to meet the low nitrogen emission standards. The use of a number of international well-known brands of imported burners, to adapt to a variety of application scenarios, to ensure quality and safety.

Horizontal gas thermal oil boiler is widely used in chemical, plastic, rubber, deodorization, fatty acid distillation, heating, hydrogenation reaction, esterification, hot pressing, industrial distillation, oil, petrochemical, textile, printing and dyeing, fiber, carbon, building, cement, asphalt, metal, coating, wood processing, paper printing, such as atomic energy industry. Themal oil boilers has high temperature, low pressure, accurate temperature control and high utilization rate of heat energy. The heating surface of the product is densely arranged disc pipe, and the heating surface is sufficiently arranged to reduce the heat load on the surface of the pipe and make the use of heat conducting oil safer. The diameter and length of the radiant coil of the gas fired thermal oil boiler are fully adapted to the flame of the combustor, so as to ensure the reliable work and adequate cooling of the coil.

The horizontal thermal oil heater has a compact structure, which greatly saves the floor space of the boiler room. Air preheater is set at the tail of large boilers to improve boiler efficiency. In order to ensure the full heat transfer of the furnace body and the higher thermal efficiency of the boiler system, the boiler convection heating surface adopts the higher reasonable flue gas velocity on the basis of rigorous calculation. Heating up to 300℃ above, general working pressure in 1MPa, safe and reliable. Welcome users to our factory for consultation and visit, Zozen Boilers wholeheartedly serve you!