The main structure of the 10 ton biomass boiler is composed of a heat exchange system consisting of a drum, a collection box and a water wall. The main heating surface of biomass hot water boiler is the water wall in the furnace, part of the drum and the convection tube bundle of threaded smoke pipe in the drum. This product is composed of five parts when leaving the factory: boiler body, energy saving device, smoke duct, dust collector, pipeline system. The first four parts have been manufactured in the factory and transported to the installation site for assembly, which can greatly shorten the installation cycle and ensure the installation quality of the products.
SZL type hot water boiler adopts single cylinder longitudinal arrangement, compact structure, small occupation area, high flame full degree. The furnace of this series of hot water boiler adopts the form of curved water-wall tube, drum and left and right collecting boxes, which can expand freely upward. The water wall adopts light tube water wall, which is easy to manufacture and process. The convection tube in the drum adopts the rolling thread smoke pipe to improve the winding of the working medium and increase the heat transfer. The outer packing guard plate is made of pressing guard plate with beautiful appearance. The boiler adopts high thermal resistance material as insulation layer, which has good thermal insulation performance.
SZL series biomass boiler assembly chain grate has high automation level, safe and stable operation, strong fuel applicability and high fume emission standard. After the furnace for the burning chamber, convection tube bundle, tail with economizer. The flue gas enters the tail flue through the furnace, the embers chamber, the convection tube bundle and the economizer, and is discharged into the atmosphere through the dust collector, induced draft fan and chimney. The front wall is arranged with secondary air, controlled by valves, which is put into use when burning biomass fuel to strengthen combustion, so that the fuel is fully burned out and the combustion efficiency is improved. Biomass hot water boiler adopts higher feed port to meet the demand of biomass fuel.
This series of biomass fired boiler, fuel from coal scuttle land on fire grate, as in the chamber of a stove or furnace combustion, flue gas entering the convection bank area after the smoke baffle wall, flue gas flow to the S type curve, using the inertia effect of dust in the flue gas separation after falling into the Settings below four gravity type hopper, falling with the grate operation with coal cinder in slag, the slag discharge machine furnace. Boiler overall structure is reasonable, auxiliary parts are complete, reasonable price, quick spot.
SZL type biomass boiler according to the operation of the reaction process, and can be divided into two parts before and after, the former part of the core body is covered with water wall around, the water wall is respectively connected with the cylinder and combustion chamber; The latter part of the core body is the vertical “S” shape densely arranged convection tube bundle, the main role is to absorb the heat energy in the high temperature flue gas, and then the flue gas is led to the economizer and dust collector, and then discharged out of the furnace.
Biomass hot water boiler are mostly large layer fired boilers, which are suitable for biomass pellets, pressing blocks, charcoal, coal and other solid fuels. The furnace body can be divided into two parts from the appearance, the upper part is mainly heated part, the lower part is mainly combustion reaction part. Zozen Boilers produce biomass boiler fuels with high adaptability, low cost and high practicability. Boiler tube space, reasonable design and complete configuration, high quality steam, wide range of applications.