Light oil steam boiler has high and low water level alarm function, low water level interlock protection function and overpressure alarm, overpressure interlock protection function. With light diesel and natural gas as fuel, the fuel is ejected (atomized) from the burner, ignited, suspended combustion in the furnace, scour the second return convection flue through the rear smoke window, and then discharged into the atmosphere through the chimney of the energy saver arranged on the left side of the boiler. SZS light oil boiler uses high thermal resistance material as insulation layer, good insulation performance.
The series boiler adopts quick loading structure, reasonable structure, convenient transportation, installation, maintenance and management. The boiler has the advantages of full output and stable load. Transverse scour of flue gas on convection tube bundle, good heat transfer effect and low metal consumption. SZS series boiler adopts double drum (or three drum) D type membrane wall furnace structure. The boiler consists of upper (middle), lower barrel, membrane water wall, convection heat exchange tube bundle, superheater, tail economizer, condenser and so on.
SZS light oil boiler full membrane wall structure, furnace and flue steel, strong anti-explosion ability, safe operation. This series of steam boilers have single stroke of convection tube bundle, reduce the side resistance of flue gas, best economic flow rate design, micro positive pressure combustion, improve heat transfer efficiency. The boiler is manufactured with larger furnace volume, section width and length dimensions, suitable for a variety of burner arrangements. Convenient arrangement of multiple burners. The fuel stays in the furnace longer, burns more fully and is more efficient. This series of products use large furnace size, meet the requirements of ultra-low nitrogen combustion, combined with the burner can make NOx emissions meet the requirements of environmental protection.
Light oil steam boiler adopts large furnace size to meet the requirements of ultra-low nitrogen combustion, and the combination of burner can make NOx emissions meet the requirements of environmental protection. Furnace water wall and convection heat exchange surface layout, boiler heating up fast, large boiler water capacity, safe and stable operation. SZS series steam boiler adopts high quality insulation materials and special construction technology, small heat loss and fuel saving. Automatic burner, ignition program control and overpressure, flameout, gas leakage protection automatic control system.
Forced circulation is adopted in the high temperature area of the oil-fired steam boiler body to ensure that the heating surface of each part can be cooled reliably and prevent vaporization. Boiler equipped with explosion-proof door and flame detector, safe and reliable operation. The series boiler on both sides of the membrane wall and the sealing between the pot tube are all using comb shaped plate, put an end to the use of refractory concrete sealing caused by condensed water and gas leakage. Boiler before leaving the factory through air tightness test, to ensure that there is no slight leakage of gas.
The SZS light oil boiler is equipped with a low-emission burner, and the Nox is as low as 30mg/Nm3. Internal insulation measures are adopted at the flue and boiler flue gas port, which effectively reduces the noise during boiler operation. The boiler combustion chamber adopts a full-membrane water-cooled wall structure, adopts micro-positive pressure combustion, there is no smoke problem, and the operating environment is pollution-free. The combustion chamber of SZS boiler manufacturing adopts narrow-pitch tube membrane water-cooled wall, which has good air tightness, reduces heat loss, and improves the thermal efficiency of the boiler. Our factory specializes in the production of various types of boiler products, and has received unanimous praise from users for many years. Welcome everyone to come to consult!